1、花上半小时将雨刮器和叶片拆下,用压力模具交叉螺丝拆卸,一般有6到10颗螺丝。
1.Spendhalfanhourtakingoffthewipersandleaves,unscrewingwithpressuremoldcrossscrews,generally6to10screws.
2、找到水泵外壳底部的排水口,使用螺丝刀将水泵外壳上的螺钉拆除,拆下泵盖座,取出电磁阀和连接件,把新的水泵座放入,将水泵附件在泵盖上,并把新水泵装入。
2.Findthedrainportatthebottomofthewaterpumpcasing,usethescrewdrivertoremovethescrewsonthewaterpumpcasing,removethepumpcoverseat,takeoutthesolenoidvalveandconnector,putthenewwaterpumpseatin,attachthewaterpumpaccessoriestothepumpcover,andinstallthenewwaterpump.
3、把软管和空气过滤器装好,然后将接头和软管连接,再将水泵安装到工厂安装的位置即可。
3.Installthehoseandairfilter,thenconnecttheconnectorandhose,andtheninstallthewaterpumptothepositionwherethefactoryisinstalled.